24
i
EN
14. Initial commissioning with the help of the installation wizard
5.
Registering mode starts automatically.
◆
The number of assigned DuoFern actua-
tors is displayed.
◆
Registering mode remains active for
maximum 120 seconds.
◆
It can be activated again by pressing the
set key
[ ]
.
8.
Configure the
switching time mode for the
opening time
[ ]
:
6.
Switch all DuoFern actuators that you wish to
control with the DuoFern HomeTimer one after
the other to registering mode.
◆
NORMAL
◆
ASTRO
◆
OFF
Switch time mode, see page 38.
NORMAL
At the configured time, an
[ Up ]
-signal will
be sent to the assigned DuoFern actuators.
Example:
The roller shutters open at the configured
opening time.
ASTRO
The control command is sent at the daily re-
calculated dawn time.
The previously configured opening time is
interpreted as
earliest at xx:xx hours
.
Example:
The roller shutters open at the daily re-calculated
dawn time.
OFF
No automatic control function is executed
for
[ Up ]
.
To do this read the
operating instructions
for the actuator in
question.
7.
Confirm the registering process as soon as all
desired DuoFern actuators are successfully
assigned.
The rotating bar indicates
that registering mode is
still active.
Summary of Contents for DuoFern HomeTimer 9498-UW
Page 70: ...70 EN...
Page 71: ...71 EN...
