21
EN
9.1 Logging on DuoFern Devices
1.
Switch the desired DuoFern device to the registering mode
(please refer to the relevant instruction manual).
2.
1 sec. Activate the registering mode of the
DuoFern Multiple Wall Controller.
Simultaneously press and hold the
buttons 1 and 2 for 1 second.
LEDs 1 and 2 will flash green.
120 sec.
The registering mode remains active
for approx. 120 seconds.
3.
After successfully logging on, the LEDs of the remaining available
buttons will light up green.
4.
Tap on the desired available button group to allocate the new
DuoFern device to this button group. You can use the left or right
button.
The successful assignment is confirmed by the green LEDs flash-
ing three times briefly.
Notes on multi-channel actuators
The first channel is initially assigned with multi-channel actuators
and then confirmed by the green LEDs flashing three times briefly.
The LEDs that are still free then light up green again.
The next channel can now be assigned by tapping the desired
free button group.
If you want to skip a channel when logging on, proceed as
follows as soon as the free LEDs light up green:
i
Morning Mood
Wellness
Roller shutters
Summary of Contents for DuoFern 9494-1
Page 34: ...34 EN i...
