18
EN
8.3 Installation of the DuoFern Multiple Wall
Controller
i
The DuoFern Multiple Wall Controller 9494-1 is intended for sur-
face-mounting. The supplied wall bracket can be screwed in place
or stuck to the wall.
1.
Select and mark the desired installation position.
2.
Pull the protective film from the adhesive strip provided and
stick it on the back of the wall bracket.
3.
Remove the second protective film and firmly press the wall
bracket with the adhesive strip on to the wall.
If you wish to screw the wall bracket on, you will need to drill the
according installation holes and use appropriate wall plugs and
screws.
Adhesive strip
Screws not included in the scope
of delivery.
Summary of Contents for DuoFern 9494-1
Page 34: ...34 EN i...
