9
2) Plug in the Display Console with adapter
Note:
It is recommended to plug in the power adapter to reduce the battery
consumption and extend the service life.
Note:
If the power adapter is plugged in,
BL ON
will display in the Time area for
three seconds when power up. Conversely,
t
he icon
will display .
3.4.3 Connect the Sensors with Display Console
Once the display console is powered up, it will automatically scan the nearby
Integrated Outdoor Sensors.
When connected with the Integrated Outdoor Sensor, the measured values (Outdoor
temperature, Humidity, Rainfall, Pressure, Wind speed, Wind direction,etc) will show
up on the display console.
Note:
Make sure that place the distance between the weather station sensor and
the display console is about 3m-30m. If the weather station is too close or too far
away, it may not receive a proper signal.
Note: DO NOT press any menu buttons until the outside sensor report
display on the screen, otherwise the outdoor sensor will be terminated to
connect with the console.
3.5 Sensor Operation Verification
The following steps verify proper operation of the sensors prior to install the sensor
array.
1. Verify proper operation of the rain gauge. Tip the sensor array back and forth
several times. You should hear a "clicking"sound within the rain gauge. Verify the
rain reading on the display console is not reading 0.00. Each "click"represents 0.1
inch of rainfall.
2. Verify proper operating of the wind speed. Rotate the wind cups manually or with
a constant speed fan. Verify the wind speed is not reading 0.0.
Summary of Contents for WF-100C Lite
Page 32: ...31 3 When the registration is completed successfully will pop up the page below ...
Page 89: ...88 In Ihrem Posteingang sollten Sie nun eine entsprechende E Mail vorfinden ...
Page 95: ...94 Klicken Sie nun abschließend auf die mit Create bezeichnete Schaltfläche ...
Page 110: ...109 ...
