background image

10 

THE RADCLIFFE WHEELBASE 

 

6

              

SEATING SYSTEM

 

Your wheelbase has  been supplied 
with the Seating System fitted.  If it is 
a requirement to have the seat re-
moved from the wheelbase check 
with your wheelchair service to 
identify what type of interface has 
been used to secure the seat to the 
wheelbase.  If it is a Radcliffe Inter-
face then proceed as follows:   

•       

Release the interface cam 
locks - there are two on each 
side - located over the top 
seat rails. 

•       

Gently pull up and lift the seat 
in line with seating supplier’s 
instructions. 

 
If a Radcliffe Interface has not been used, refer to your Wheelchair Service or Seating 
Supplier for instructions. 
 

7a

           

OPERATING AND APPLYING THE SHADOW MK4 BRAKES

 

 
Your wheelbase is fitted with hand operated hub brakes to allow regulation of speed on 
hills and whilst travelling along. These are located on the push handles.  
 

To  apply  the  brakes,  pull  the  brake  levers  (1)  evenly  and  smoothly  towards  the 
handle and bring the wheelbase to a stop. 

To lock the brakes on, pull the brake levers until it is possible to engage the lock-
ing lever in the second of the three ratchet positions.  

Still  pulling  the  lever  (1),  push  the  locking  lever  in  direction  2  into  the  second 
ratchet position to secure the brakes.  

To release the brakes, push the locking lever in direction 3, whilst pulling the brake 
lever. 

 
 
IMPORTANT NOTE:  
The hub brakes should be used to regulate the speed 
on slopes. Secondary attendant brakes are available 
and recommended if the wheelbase is to be parked 
or used frequently on slopes.  
Attendant brakes: Part no. SP500 - see section 7b 

 
 
 

 

2nd Ratchet position 

19 

User/Carer Handbook 

16            MANOEUVRING KERBS AND STEPS 
 
16.1

         

To Go Up a Kerb 

Have the wheelbase facing the kerb.  Swing away the anti-tippers, firmly hold the 
push handles and place your foot on the silver tipping lever (see page 7 item 11).  
Then pull the handles towards you and with your foot, push down and forward on the 
tipping lever.  This will raise the front wheels to clear the step. 

Continue tipping until the wheelbase is “balanced” on the back wheels.  When 
“balanced” little to no effort is required to hold the wheelbase in this tipped position, 
removing the foot should not cause any excessive increase in the effort to hold the 
wheelbase steady with the hands only. 

With the Wheelbase “balanced” keep a firm grip on the push handles and push 
chair forward up onto the pavement. 

If there was a need to change the tilt angle, reposition tilt to its original position. 

 
NOTE:  DO NOT attempt to raise the front wheels without using the tipping levers.  This 
could result in the carer straining their back and will place excessive loading on the push 
handles. 
 

16.2

         

To Go Down a Kerb

 

NOTE: DO NOT TIP THE WHEELBASE FORWARD AS THE OCCUPANT MAY FALL OUT. 

 

Firmly hold the push handles and place your foot on the silver tipping lever (see page 
7 item 11).  Then pull the handles towards you and with your foot, push down and 
forward on the tipping lever.  Raise the front wheels until the chair is balanced. 

With the Wheelbase “balanced” move carefully forward and lower the wheelbase 
down the kerb whilst it is tilted on its rear wheels. 

Place your foot back on the tipping lever and carefully lower the front wheels back 
on the ground. 

If there was a need to change the tilt angle, reposition tilt to its original position. 

 

16.3 

        

Slopes

 

When the Seating System was fitted to the Shadow Wheelbase the stability of the 
complete system  (wheelbase and seating system) would have been checked by 
the Rehabilitation Engineer 

When used on slopes the stability of the wheelbase is changed.  If the wheelbase is 
parked, it is recommended that it is facing forwards down the slope.   

 
The  combined  weight  of  the  wheelbase  seating  system  and  occupant  may  be  very 
heavy  and  care  should  be  taken  when  negotiating  slopes,  particularly  when  going 
down  .    BE  AWARE  of  the  DANGER  and  have  a  second  assistant  to  help  push  up  the 
slope  or  hold  to  go  down.    The  hub  brakes  should  be  used  to  regulate  the  speed  on 
slopes. Secondary attendant brakes are available and recommended if the wheelbase 
is to be parked or used frequently on slopes.  
Attendant brakes: Part no. SP500 
 
 
 

Summary of Contents for Shadow 4















Reviews: