30
Figure 2 - Thermostatic cartridge removal
Removal clip (in place)
Head nut
35 mm
4.
With removal clip still in place, unscrew the head nut using 35 mm A/F wrench;
this will release the body shroud and also begin to draw the Thermostatic cartridge
out of the body (see
Figure 2
).
Warning:
some residual water may be released.
Note which inlet aligns with the hot (marked H and red) lug on cartridge.
Pull the Thermostatic cartridge free of the valve body.
Figure 1 - 215-t3 bc
