WARNING
Please read installation instructions carefully prior to installing. Before using the product thoroughly test the fully-weighted
product (with equipment in place) to ensure the product has been installed properly. Do not allow children to play on
product. ITW Brands is not responsible for any damage resulting from improper installation, overloading or product failure.
3
2
4
1
A
B
C
D
E
F
Set curved base sections
A
and
B
on floor
and slide into support section
C
. Use eight
screws to fasten.
To protect floor attach feet (6
F
) to bottom
of assembly, as shown.
Slide straight section
D
and
E
over support
section
C
as shown, making sure section
E
is on top.
Fasten using 4 screws and nuts.
Fasten universal arms into key holes as
shown. Push in and then down to secure.
This step will take some adjustment to each
arm as bikes will vary in size.
