Date [YYYY-MM-DD]
Fill in Local Date in required format
Time [HH:MM:SS]
Fill in Local Time in required format
RipEX Time zone
Select RIPEX Time zone from list box.
Default = (GMT +1:00) Central Europe
This time zone is used for conversion of internal Unix epoch time to "human readable
date&time" in RipEX logs.
Daylight saving
List box: On, Off
Default = On
If
On
, Daylight saving is activated according the respective rules for selected RipEX Time
zone.
NTP
Internal calendar time in RipEX is synchronized via NTP and RipEX also acts as a standard
NTP server simultaneously.
Current Date&Time
Information about the actual date and time in RipEX
Time source
List box: NTP server, Internal GPS
Default = NTP server
NTP server
– The source of time is a standard NTP server. This server can be connected
either via the Ethernet interface or over the Radio channel (any RipEX runs automatically
as a NTP server).
Internal GPS
– The source of time is the internal GPS. In this case only RipEX Time
zone and Daylight saving parameters below are active.
Source IP
Default = empty
IP address of the NTP server, which provides Time source. Date and Time will be requested
by RipEX from there. More NTP servers can be configured, the more servers, the better time
accuracy. If the Time source is a RipEX over Radio channel, only one source server is re-
commended, since the Radio channel could be overloaded.
Minimum polling interval
List box: 1min to 2h 17min
RipEX polls the source server in order to synchronize itself in the set period or later.
RipEX Time zone
Select RipEX Time zone from list box.
Default = (GMT +1:00) Central Europe
This time zone is used for conversion of internal Unix epoch time to "human readable
date&time" in RipEX logs..
Daylight saving
List box: On, Off
RipEX Radio modem & Router – © RACOM s.r.o.
98
Advanced Configuration
Summary of Contents for RipEX
Page 2: ......