The Internal switch port RMON counters
These counters provide a set of Ethernet statistics for frames received on ingress and transmitted on
egress.
Ingress statistics counters
In good octets
The sum of lengths of all good Ethernet frames received, that is frames that are not bad frames.
In bad octets
The sum of lengths of all bad Ethernet frames received. Fragments are included.
––––––––––––––––––
In unicasts
The number of good frames received that have a Unicast destination MAC address.
In multicasts
The number of good frames received that have a Multicast destination MAC address.
Note
This does not include frames counted in "In broadcasts" nor does it include frames counted
in "In pause".
In broadcasts
The number of good frames received that have a Broadcast destination MAC address.
In pause
The number of good frames received that have a Pause destination MAC address (Flow Control
frames). This includes Priority Flow Control Pause frames too.
––––––––––––––––––
In undersize
Total frames received with a length of less than 64 octets but with a valid FCS.
In oversize
Total frames received with a length of more than MaxSize octets but with a valid FCS.
In FCS errors
Total frames received with a CRC error not counted in "In fragments", "In jabber" or "In RX" errors.
In fragments
Total frames received with a length of less than 64 octets and an invalid FCS.
In jabber
Total frames received with a length of more than MaxSize octets but with an invalid FCS.
In RX errors
Total frames received with an RxErr signal from the PHY.
––––––––––––––––––
111
© RACOM s.r.o. – RAy3 Microwave Link
Configuration
Summary of Contents for RAy3-11
Page 2: ......