Description
Parameter
Specify a fixed client IP address on the mobile interface.
Specific Client
IP Address:
Specifies the condition for a profile switch to the other profile.
Primary profile
Profile switch
condition:
○ never the Fallback profile will not be used
○ redial attemps reached
Fallback Profile will be done after the number of redial attemp will be exceeded.
(Interfaces
➝
Mobile
➝
Administrators)
○ ping check failed
Fallback Profile will be used in case that number of trials set in Interfaces
➝
WAN
➝
Link Managenet
➝
Settings will be excceded.
Note
If the time set in Services
➝
Connection Supervisor
➝
Ping Monitor Configuration is
shorter then time set. In the above mentioned menus – Fallback Profile NEVER be used.
•
Maximum Segment Size (MSS)
described above Maximum Segment Size
•
SIM
This section lets you store the PIN code. With the correct PIN code deposited you will be able to
enable or disable PIN protection.
MG102, M!DGE, GPRS/EDGE/UMTS routers – © RACOM s.r.o.
28
Configuration