4.3 PARKING BRAKE LEVER
This lever stops the machine from moving when it has been parked.
There are two positions:
4.3 PARKING BRAKE LEVER
This lever stops the machine from moving when it has been parked.
There are two positions:
–The brake is engaged by pressing the pedal (
☛
4.2)
right down and moving the lever to position «B».
When you take your foot off the pedal it will be
blocked by the lever in the down position.
– To disengage the parking brake, press the
pedal(
☛
4.2).The lever will return to position «A».
4.4 SPEED CHANGE LEVER
This lever has six positions for the four forward
gears, the neutral position «N», and reverse
«R».
– To change gear, press the pedal (
☛
4.2)
halfway down and move the lever as per
the indications on the label.
Reverse must be engaged when the machine has stopped.
4.5 CUTTING HEIGHT ADJUSTING LEVER
There are five positions for this lever, shown as
«1» to «5» on the plate, which correspond to
various cutting heights from 3.0 to 7.0 cm
.
– To go from one position to another,
move the lever sideways and put it back in one
of the stop notches.
A
B
R
N
4
3
2
1
4.5
13
Summary of Contents for RAC62PR-1-UK
Page 36: ...36...