Racing RAC1036ET, User Manual

Page: 7 / 24

o)Be aware that the application may unexpectedly
bounce upward or jump forward if the tines should
strike extremely hard, packed soil, frozen ground, or
buried obstacles such as large stones, roots or
stumps.
p)Do not put hands, feet or any body part or clothing in
the vicinity of rotating tines. Caution! Risk of injury!
q)Only guide the device at walking pace. Do not over
reach. Maintain proper footing and balance at all
times.
r) Be aware of extension cord while operation. Be
careful not to trip over cord. Always guide the cord
away from tines at all times.
s) If the device strikes a foreign body, examine the
application for signs of damage and carry out any
necessary repairs before restarting and continuing to
work.
t) If the device should start to vibrate abnormally, switch
off the motor and check for the cause immediately.
Vibration is generally a warning of trouble.
u) Holding the guide bar and lift the application to move
it from one place to another.
v) Always switch off the device, disconnect the plug and
wait until the application stops before carrying out
maintenance or cleaning work. Caution! Tines do not
stop immediately after switching off.
w) Use caution when cleaning or performing
maintenance on the device. DANGER! Watch your
fingers! Wear gloves!
x) It is forbidden to move or modify any of the electrical
and mechanical safety devices.
y) The machine must be stopped when carrying out
maintenance and cleaning operations, when changing
tools or when transported by means other than under
its own power. If the supply cord is damaged, it must
be replaced by a special cord or assembly available
from the manufacturer or its service agent.