Step 11:
Install Side Arms
Profile:
● 2 x 19” 2-Slot Profile
Hardware:
● 8 x 12mm
SHORT
Bolts
● 8 x Standard Spring T-Nuts
Connect 19” side arms with 12mm bolts in the top and bottom brackets. You may need to
slide the top and/or bottom slightly to get it all lined up. This is normal.
To pivot arms: Keep center bolts tight, just slightly loosen end bolts (top & bottom) in the angle
adjustment channel. Then tighten all bolts again to lock in place.
Use printed guides to set arms to 50° angle
(you can change this later)
Page 17
PRO Series - TRIPLE Monitor Mount Manual (v.04/2021.1)
