Step 10:
Install Top & Bottom Pivot Plates
Hardware:
● 2 x Top Pivot Plates (with angle print)
● 2 x Bottom Pivot Plates (blank)
● 8 x 12mm
SHORT
Bolts
● 8 x Standard Spring T-Nuts
Install top pivot plates (
with print
) and bottom pivot plates (no print). Leave bolts slightly
loose so you can slide them back and forth.
Mount them at the ends of the horizontal rail.
We can move them closer in a later step.
Page 16
PRO Series - TRIPLE Monitor Mount Manual (v.04/2021.1)
