Step 8:
Install Center Monitor
Hardware:
● 2 x 12mm
SHORT
Bolts
● 2 x Standard Spring T-Nuts
By keeping bolts slightly loosened you can make
Two Types of Adjustments:
1. Slide right & left along the rail (Move until centered. Check with tape measure.)
2. Tilt monitor angle back and forward, which slides 12mm SHORT bolt in Vesa Mount top
channel (Move until monitor is level. Check this using a level app on most smartphones.)
To lock monitor angle adjustment in place, tighten bolts while holding the monitor in position.
Letting go before tightening will allow the monitor to slide back to default position.
Page 13
PRO Series - TRIPLE Monitor Mount Manual (v.04/2021.1)
