Trak Jack - 910192
Phone: (262) 637-9681
10.2019 Rev 3
Page
10
of
18
Hose Types
Hydraulic hose types authorized for use with the Trak Jack are:
1. Labeled and certified nonconductive.
•
This is the only hose authorized for use near electrical conductors.
2. Wire braided (conductive)
•
This hose is conductive and must never be used near electrical conductors.
3. Fabric braided (not certified or labeled non-conductive)
•
This hose is conductive and must never be used near electrical conductors.
The rated working pressure of the hydraulic hose must be at least 175 bar (2500 psi).
Hydraulic Hose Recommendation
Hydraulic Hose Recommendation
Flow Per Circuit
Length Each Hose
Use
Inside Diameter
SAE Spec Hose
(Wire Braid)
SAE Spec Hose
(Fiber Braid)
GPM
LPM
Feet
Meter
Inch
MM
5 to 8
19 to 30
To 50
To 15
Both
1/2
13
SAE 100R1-8
100R7-8
5 to 8
19 to 30
51 to 100
15 to 30
Both
5/8
16
SAE 100R2-10
SAE 100R8-10
5 to 8
19 to 30
100 to 300
30 to 90
Pressure
Return
5/8
3/4
16
19
SAE 100R2-10
SAE 100R1-12
SAE 100R8-10
SAE 100R7-12
9 to 12
34 to 45
To 50
To 15
Both
5/8
16
SAE 100R2-10
SAE 100R8-10
9 v 12
34 to 45
51 to 100
15 to 30
Pressure
Return
5/8
3/4
16
19
SAE 100R2-10
SAE 100R3-12
SAE 100R8-10
SAE 100R7-12
9 to 12
24 to 45
100 to 200
30 to 60
Pressure
Return
3/4
1
19
25.4
SAE 100R2-12
SAE 100R1-16
SAE 100R8-12
SAE100R7-16
The rated working pressure of the hydraulic hose must be at least 2500 psi / 173 bar.
Hydraulic Fluid Recommendation
Inspect hoses for cuts, crushing, leaks, or abrasion, which
may be a safety hazard or reduce fluid flows.
The following fluids work well over a wide temperature range
at startup, allow moisture to settle out, and resist biological
growth likely in cool operating hydraulic circuits.
Others that meet or exceeds the specifications of these
fluids may also be used.
Type
Hydraulic fluid
Chevron Clarity AW 15032
Exxon
Univis J 32
Mobil
D.T.E. 13M
Gulf
Harmony AW-HVI-150-32
Shell
Tellus T 32
Texaco Rando HDZ 32
Union
Unax AW-WR-32
Amsoil AWH 15032
Sunvis
Low Pour H/032-product code 19300
