Rachel Allen RA-HB1, Instructions And Guarantee

Page: 4 / 20

4 5
Connection to the
Mains Supply
Check that the voltage marked on the product
corresponds with your supply voltage.
This product is fitted with a 13A plug complying
with BS1363. If this plug is unsuitable or needs to
be replaced, please note the following:
This product is double insulated and therefore
does not require an earth connection.
Important
: The wires in the mains lead are
coloured in accordance with the following code:
BLUE – NEUTRAL
BROWN – LIVE
This appliance is fitted with a plug which has a
13 amp fuse. Should the fuse fail, then it must
be replaced with an ASTA approved fuse
(conforming to BS1362) of the same rating. If
you need to replace the plug or if the plug is of
the incorrect type for your socket, remove it and
replace it with an appropriate plug.
Dispose of the
old plug safely.
Important
: The wires in the mains lead are
coloured in accordance with the following code:
Blue=neutral, Brown=live
As the colours of the wires in the mains lead may
not correspond with the coloured markings in your
plug, proceed as follows:
Connect the
BROWN
wire to the terminal marked
‘L’ or coloured RED .
Connect the
BLUE
wire to the terminal marked
‘N’
or coloured
BLACK
.
NOTE :-The ‘L’ or ‘N’ wire must NOT be connected
to the
EARTH
terminal marked
‘E’
or coloured
GREEN
or
GREEN
and
YELLOW
.
If in doubt consult a qualified electrician who
will be pleased to do this for you. This product
conforms to EC Directive 92/31/EEC with respect
to Electromagnetic Compatibility.
NON-REWIREABLE MAINS PLUG
If your appliance is supplied with a nonrewireable
plug fitted to the mains lead, you will find that it
incorporates a fuse, the value of which is
indicated either on the base of the plug or on the
fuse carrier. Should the fuse need replacing, you
must use an ASTA approved one (conforming to
BS1362) of the same rating.
If the fuse cover is lost, the plug must not be used
until a replacement is obtained from an electrical
supplier.
If you need to remove the plug, cut it from the
mains lead and immediately dispose of it. Never
attempt to re-use this plug or insert it into a socket
outlet as there is a very great risk of an electric
shock.