background image

 

plug and take the following steps: 

  inspect for damage; 

  check for, and tighten, any loose parts; 

  have any damaged parts replaced or repaired with parts having equivalent specifications 

h)  Wear ear protection. 
i)  Wear eye protection. 
j)  In case of emergency, stop the hedge trimmer; release the trigger, switch off the tool with the ON/OFF 

button. Let it completely stop and be cool before any intervention.  

 
Operation 

Use the tool for the intended purpose and follow these provided instructions for use and maintenance 
a)  Stop the engine before: 

  cleaning or when clearing a blockage, 

  checking, carrying out maintenance or working on the hedge trimmer, 

  adjusting the working position of the cutting device, 

  Leaving the hedge trimmer unattended. 

b)  Ensure that the hedge trimmer is correctly located in a designated working position  before starting the 

engine. 

c)  While  operating  the  hedge  trimmer,  always  ensure  that  the  operating  position  is  safe  and  secure, 

especially when using steps or a ladder. 

d)  Do not operate the hedge trimmer with a damaged or excessively worn cutting device. 
e)  To reduce fire hazards, keep the engine and silencer free of debris, leaves and excessive lubricant. 
f)  Always ensure that all handles and guards are fitted when using the hedge trimmer. Never  attempt to 

use an incomplete hedge trimmer or one fitted with an unauthorized modification. 

g)  Always use two hands to operate a hedge trimmer fitted with two handles. 
h)  Always  pay  attention  to those  around  you  and  stay  alert  about  possible hazards  that  you  may  not  be 

aware of due to the noise of the hedge trimmer. 

Maintenance and storage 

a)  When  the  hedge  trimmer  is  stopped  for  servicing,  inspection  or  storage,  shut  off  the  power  source, 

disconnect the spark plug wire from the spark plug and make sure all moving parts have come to a stop. 
Allow the hedge trimmer to cool before making any inspections, adjustments, etc. 

b)  Store the hedge trimmer where the fuel vapour will not reach an open flame or spark. Always allow the 

hedge trimmer to cool down before storing. 

c)  When transporting or storing the hedge trimmer, always fit the cutting device transport guard. 
 

Additional instructions 

  Warning - Never allow children to use the hedge trimmer. 

  Work only during in the day or with an enough artificial light.  

  Before starting to work, check the condition of the tool.  

  Ensure that all the parts of the machine are well fixed and tightened. 

  Control regularly that the blade of cut is in good state. 

  Always hold firmly the hedge trimmer with the two hands. 

  Never take or hold the hedge trimmer by the blade. 

  Maintain clothing out of reach blade. 

  Keep the device distant from all shapes of sparks, flames and flammable materials. 

  Control that the working areas are free from all shapes of obstacles. 

  Work with precaution, be not distracted. 

  Do not use the tool when you are under the influence of alcohol, meds or drugs, and where you are sick 

and tired.  

  Dry all possible gasoline traces by using a dry rag. 

  In case of accident, immediately stop using the machine. Check the problem. Do not use the machine 

while the machine is damaged. 

  Operate the machine only at reasonable hours 

– not early in the morning or late at night when people 

might be disturbed; 

  When blockage occurs, immediately turn off the engine with the ON/OFF button. Let the tool cool down. 

Check  and  correct  the  blockage  before  starting  again  to  work.  Use  gloves  when  clearing  a  blockage. 
Restart the machine securely when the machine is totally unblocked. 

Summary of Contents for RACCOMBID314T


































Reviews: