Calibrate temperature:
Fig
13
.
If for any reason the water temperature displayed by the controller is
different to the water temperature in your pool, you can simply adjust it
by pressing and holding the knob button for 5 seconds. The display will
show calibrate and actual temperature (Fig.13). Turn knob clockwise to
adjust it UP or anticlockwise to adjust it DOWN.
Note:
The controller will allow maximum adjustments of ±2°C. If
controller displays ‘No flow’ message than entering to calibration
mode will not be possible.
Q:
How long will it take to heat my pool?
A:
Assuming no heat losses
, and a heater sized in the ratio 1.5-kW
per 1,000 UK gallons of water (4,545-litres): it will take 2 days of
continuous running to raise the temperature of a pool from tap
temperature to swimming temperature. Heat loss will slow the heating
process, particularly during periods of cold weather, hence the higher
the water temperature is to be maintained above average ambient air
temperature, the slower the heating process will become.
The only in
fl
uencing factors are the level of insulation and the location
of the pool with regard to wind shelter.
Useful advice:
To reduce running costs and increase the heating process;
Insulate the pool wherever possible. A floating solar cover is an essential
minimum to retain heat.
1
3
ENGL
IS
H
