05 - HD2 Using with OLED Display
These notes are specifically for OLED use with VBOX Video HD2. The full OLED manual can be accessed
Hardware Connection
The OLED display uses a serial connection to display information from the VBOX Video HD2, so the CAN/SER ports on
both the HD2 and the OLED must be used.
Automatic Track Recognition
This feature allows the HD2 to search through a built in circuit database of over
and load all layouts from
the detected GPS location.
Using an OLED display, a specific layout can be selected when at a location with multiple circuits. After arriving at a
circuit and allowing the HD2 to gain a GPS lock, the desired circuit layout can be selected, as shown below.
When a track is chosen, the start/finish line will be automatically synchronised.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/VBOX_Video_HD2_User_Guide/05_-
_HD2_Using_with_OLED_Display
42
