VBOX Video HD2 - Updating the Firmware and Software
Upgrading HD2 Firmware
Occasionally Racelogic will release new versions of firmware (internal code) for the HD2, often to introduce new
features, information about the newest firmware update can be found
.
New firmware is loaded into the HD2 using an SD card or USB stick.
Download the latest ‘.vvhfw’ file
How do you run the update?
1. Download the upgrade file from the link above.
2. Place the .VVHFW file on the root directory of an SD card or USB stick (not in the media or any other folder).
3. Power up the VBOX Video HD2 unit.
4. Load the SD card or USB stick into the front panel.
5. The HD2 will double beep when the upgrade is complete (may take up to 5 minutes).
6. Turn the unit off and on again to complete the upgrade.
Notes:
•
When upgrading an HDMI output enabled HD2 (V6),
firmware version 1.3.76 or later must be used
!
•
From Firmware update 1.3.58 onwards, no power cycle is required to complete the upgrade.
•
The firmware file will be removed from the memory storage when installed to the unit.
IMPORTANT INFORMATION
When upgrading to the latest firmware, the cameras must be connected to the unit as they included as part
of the upgrade. However, this makes the cameras incompatible with units running older release firmware. If
you have more than one unit, it is highly recommended to upgrade all units in one go or isolate upgraded
units and cameras to ensure compatibility.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/VBOX_Video_HD2_Updates/
VBOX_Video_HD2_-_Updating_the_Firmware_and_Software
105
