VB2SX20SPS User Guide
Page 16 of 24
7. Connect the power cable to the VBOX
8. Connect other end of power cable to power
supply
9. See below
9. With the power applied, the display screen will illuminate. The VB2SX20SPS will start searching for satellites. The ST count will indicate the number of
satellites currently in lock. For best results ensure the VBOX has acquired a lock on 5 or more satellites, essential for quality signal reception. When using the
VBOX for the first time or when using the VBOX after a long period of time, allow the VBOX to sit for between 5 and 10 minutes to re-collect data needed to
track satellites.
As the vehicle begins moving, the display will show the speed of the vehicle, along with a regularly updated satellite count and DGPS status.
