If the layout has changed, the LEDs will briefly flash
green
twice and the unit will emit an audible confirmation
notification. The layout will be remembered after each power cycle if it is determined to be local to the detected location.
Note: When the selected track is changed, all existing lap timing values will be cleared and new lap timing gates will be
used.
Set Start/Finish Gate
Selecting the
Set Start Gate
option in the
Lap Timing Settings
will manually set a start/finish line when moving, and
will overwrite the detected line in the circuit layout. If you are defining a separate
Finish Line
, the set start/finish gate will
act as the
Start Line only
.
Note: The vehicle must be moving >0.8 km/h and the unit have a satellite lock to set a Start/Finish Line.
Set Finish Gate
Selecting the
Set Finish Gate
option in the
Lap Timing Settings
will manually set a Finish line when moving, and will
overwrite the detected finish line in the circuit layout. You must set a separate finish line if you are using
Standing Start
Mode
.
Note: The vehicle must be moving >0.8 km/h and the unit have a satellite lock to set a Finish Line.
Clear Finish Gate
(Only selectable if a Finish gate has been set)
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-
_Performance_Box_Touch_V2
20
