How to Manually Set a Start/Finish Line
You can set a start/finish line manually when moving.
This will overwrite the line detected in the circuit layout.
To manually set a start/finish line,
tap the screen
when
on the
Basic Lap Timing Screen
or select
Set Start
Gate
in the
Settings.
A screen will be displayed, giving you 5 seconds to
cancel the start/finish line set by pressing on the screen.
After the 5 seconds have passed, you need to drive
forward in a straight direction to complete the process.
The gate is set at 90° to the detected heading and the
width depends on what you have selected in the
Gate
Width Settings
.
The detected location when you initially press the screen
is used as the centre point of the start/finish gate.
If you are defining a separate
Finish Line
, the gate set
up here will act as the
Start Line only
.
New start/finish line cancellation screen
Notes:
•
To set a Start/Finish line, the vehicle must be moving >0.8 km/h and the Performance Box Touch must have a
satellite lock.
•
If the setting of the start/finish line is cancelled, any live lap prediction for the current lap will be lost and unavailable
for use.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-
_Performance_Box_Touch_V2
16
