Racelogic LabSat 3, User Manual

Page: 29 / 62

The next set of lines, configure the required Identifiers for each channel. The format is:-
<CHANNEL><IDENTIFIER><MASK>, for example 1 0x3F1 0x7FF means that channel 1 will allow recording of identifier
0x3F1. The mask value of 0x7FF is a bit-wise mask that is used by the CAN controller to allow a single identifier of a
range of identifiers to be recorded. If the mask value was set to 0x7F0, then identifiers from 0x3F0 to 0x3FF would be
recorded, not just 0x3F1. Up to 16 identifiers can be defined for each CAN channel.
LabSat 3 Single Constellation can be upgraded to capture and replay CAN. Once upgraded the LabSat will have the
capability to capture a single channel of digitized CAN data or two channels of arbitrated CAN data. LabSat 3 Dual &
Triple Constellation are supplied with the CAN functionality already included.
For further information about CAN upgrades contact your local LabSat distributor.
https://racelogic.support/03LabSat_GPS_Simulators/LabSat_3/LabSat_3_User_Manual/
29