Racelogic LabSat 3, User Manual

Page: 5 / 62

Replay Example
Example of Replay using the included SD card with preloaded scenario.
Briefly press the power button to power up the LabSat 3. Connect from the RF output on the rear of the LabSat 3 to your
GPS system antenna input. With the SD card inserted, use the
UP/DOWN arrows to select a file. Press the PLAY button
to start replay.
LabSat 3 contains an on board GNSS receiver that allows monitoring of the RF signals during record or replay. To show
a live histogram of satellite signal levels detected by the on board receiver, press the
OK button during replay. Press
the OK button again to return to the replay status display. During replay, pressing the PLAY button will halt replay and
return to the file list.
https://racelogic.support/03LabSat_GPS_Simulators/LabSat_3/LabSat_3_User_Manual/
5