10
RaceAmerica Model 6632E Display Timer
Kit Application
The Permanent Display Installation Kit is designed
for tracks where permanent installation of the display
is required. Power and data connections are routed
to the scoreboard through 3/4” conduit attached to the
backside of the display. The kit provides connection to
a 110VAC or 230VAC source to power the scoreboard.
Mounting hardware attaches to the display and provides
weather protection for the electrical connections.
Kit Components
- Lower bracket with 3/4” conduit connectors
- Aluminum cover
- 110/230VAC Power Adapter brick
- Screws for attachment to enclosure
(#8-32 X 3/8”).
Kit Installation
1. After mounting the display securely, attach
the Lower Bracket with conduit connectors using two
screws (#8-32 X 3/8”)
2. Secure the AC Adapter to the velcro pad and
plug into the power plug on the display.
3. Bring in 110/230 VAC power through one of
the conduit connectors and splice to the appropriate
wires for the AC source.
4. Bring in the data cable through the other con-
duit connector and connect to the circuit board. Do not
route data cables in the same conduit as power cables.
(Wireless units will not have a data cable).
5. Install the Cover over the AC Adapter and
wires; secure with six screws (#8-32 X 3/8”).
Permanent Display Installation Kit
Part # 6601A
AC Power Adapter
Lower Bracket
Conduit Connectors
Screws
