Race Technology DL1 MK3, Instruction Manual

Page: 32 / 45

32
Race Technology Ltd. VAT reg. 715 9671 09
After 12, King Street, Eastwood, Nottingham, NG16 3DA, UK
Tel: +44 (0) 1773 537620 Fax: +44 (0) 1773 537621
Email: sales@race-technology.com
8.5 How do I connect a logging indicator?
To connect a logging indicator, wire up as shown in the diagram below:
As well as wiring up the LED, the DL1 CLUB will need to be configured to use one of
the low side driver outputs as a status output. Read the following web page for more
information:
http://www.race-technology.com/wiki/index.php/DL1MK3Configuration/OutputDrivers
8.6 How do I fit a cable to the black connector that is used to
power the DL1 CLUB?
Select a small, flat bladed, screwdriver.
Insert the end of the screw driver into the square aperture, underneath the hole into
which you wish to fit the wire. You will need to push the screw driver in quite firmly.