21
Race Technology Ltd. VAT reg. 715 9671 09
After 12, King Street, Eastwood, Nottingham, NG16 3DA, UK
Tel: +44 (0) 1773 537620 Fax: +44 (0) 1773 537621
Email: [email protected]
5.2
Sampling Data with the DL1 CLUB
•
If used, connect a GPS antenna to the rear of the DL1 CLUB.
•
Connect the DL1 CLUB to a valid power supply. After a short pause the power light
on the front of the unit will come on and the status light will start flashing rapidly.
•
Insert a freshly formatted SD card into the slot, the status light will stop flashing for a
second or 2 then start again when the DL1 CLUB is ready to log data.
•
Press the "Start/Stop Logging" button on the front of the DL1 CLUB, the "Logging"
light will come on indicating that the DL1 CLUB is writing data to the SD card.
5.2.1
To stop data logging:
•
Press the Start/Stop Logging button on the front of the DL1 CLUB; the "Logging"
light will go out.
•
ONCE THE LOGGING LIGHT HAS GONE OUT, eject the SD card from its slot.
Power can now be disconnected if required.
•
Put the SD card in a suitable reader and check a file has been written to it.
5.2.2
Advanced operation
You can set the DL1 CLUB to automatically start and stop logging based on external
inputs or on a timed basis. For more information on how to do this, read the DL1 CLUB
Configuration software section on the web:
http://www.race-technology.com/wiki/index.php/Configuration/DL1MK3Configuration
5.3
Real Time Output
Practically the whole time the DL1 CLUB is powered up, it is outputting data in real
time to the external serial port. This can be used for a number of applications including
monitoring the data on a PC or streaming to a dashboard or video logger.
5.4
Further Reading
For more information on operating the unit, please read the following section:
•
Manually Commencing Logging:
http://www.race-
technology.com/wiki/index.php/HowDoI/ManuallyCommenceLoggingOnDL1MK3
•
Automatic Logging Control:
http://www.race-technology.com/wiki/index.php/DL1MK3Configuration/AutomaticLoggingControl
Summary of Contents for DL1 MK3
Page 1: ......
