Race Technology DL1 MK3, Instruction Manual

Page: 19 / 45

19
Race Technology Ltd. VAT reg. 715 9671 09
After 12, King Street, Eastwood, Nottingham, NG16 3DA, UK
Tel: +44 (0) 1773 537620 Fax: +44 (0) 1773 537621
Email: sales@race-technology.com
R
EA
R
A1 Analogue input 1, for use with external sensors maximum input 25v.
A2 Analogue input 2, for use with external sensors maximum input 25v.
A3 Analogue input 3, for use with external sensors maximum input 25v.
A4 Analogue input 4, for use with external sensors maximum input 25v.
A5 Analogue input 5, for use with external sensors maximum input 25v.
A6 Analogue input 6, for use with external sensors maximum input 25v.
A7 Analogue input 7, for use with external sensors maximum input 25v.
A8 Analogue input 8, for use with external sensors maximum input 25v.
A9 Analogue input 9, for use with external sensors maximum input 25v.
Low side driver output, maximum 0.5A
A10 Analogue input 10, for use with external sensors maximum input
25v. Low side driver output, maximum 0.5A
A11 Analogue input 11, for use with external sensors maximum input
25v. Low side driver output, maximum 0.5A
A12 Analogue input 12, for use with external sensors maximum input
25v. Low side driver output, maximum 0.5A
GND Ground, recommended for grounding analogue sensors.
Ground
Ground, recommended for grounding analogue sensors.
+5v1
+5v output, maximum current output 0.5A. This can be used for
powering external sensors
+5v2 +5v output, maximum current output 0.5A. This can be used for
powering external sensors
+12v Power ESSENTIAL! This is the power supply for the DL1 CLUB, it needs
10v-15v and about 150mA minimum. More details are here:
http://www.race-
technology.com/wiki/index.php/Common/PowerSupplyRequirement
s
GND ESSENTIAL! This is the ground for the power supply to the DL1
CLUB. More details are here:
http://www.race-
technology.com/wiki/index.php/Common/PowerSupplyRequirement
s.
rL This is the "low level" rpm input that triggers about 5v - this MUST
NOT be connected to the ignition coil. More details are here:
http://www.race-
technology.com/wiki/index.php/Common/ConnectingRPMSensors