Warning!
If the device has not been active for more than 5 minutes, the connection procedure should
be repeated.
Charging of the Devices (Controller & Sensors)
Use the USB cable to charge the Device.
You can connect the USB cable to a computer or power adapter.
Recommended specifications of the power adapter: DC 5V, 1000mA.
Warning!
Do not use power adapters with other specifications, as this may damage the Device.
To connect, use a USB cable that conforms to USB standards (USB2.0 AM/micro USB BM).
Warning!
Use extreme caution when handling the battery. Improper use can result in fire and burns.
Warning!
Never attempt to open, crush, heat, or burn a battery.
Warning!
Do not leave the battery charging for a prolonged period of time when the Device is not in
use.
Warning!
Do not operate with a damaged or leaking battery.
Warning!
If liquid leaks from the internal battery, stop using the Device immediately and contact
Clients Support for assistance.
Warning!
If liquid gets on your clothing, skin, or eyes, immediately rinse the affected area with clean
water and consult a doctor.
Warning!
Battery fluid may cause blindness.
Battery life and operation terms
Battery life is limited. The battery life of the Devices will be gradually reducing.
The life of the Devices depends on the method and conditions of its storage, charging, frequency of
use and other factors.
