RACCEWAY E-MOPED, User Manual

Page: 7 / 64

3. Fit the wheel so that the brake disc is on the left.
4. lnsert the shaft rod through the wheel and insert the LARGE spacer roller and slide the shaft
rod through the right fork.
5. Then fit the washer and nut and tighten with a torque wrench.
6. Remove the centering of the E-MOPED and tighten the nut properly with a torque wrench.
4. INSTALLATION REAR SUITCASE
1. Place the case on the hol der and screw it to the bottom of the holder with three screws. (head
screws)
2. Screw the case on the sides to the holder with four screws (self-tapping)
.3. Screw the case to the E-MOPED mask with three screws.
4. Attach the left and right side screw caps (you will find the caps in the installation package).
1.
4.
6