![background image](http://html1.mh-extra.com/html/racal-instruments/multiplexer-plug-in-1260-134/multiplexer-plug-in-1260-134_user-manual_3138405023.webp)
1260-134 User Manual
Racal Instruments
Ó
2003
Module Operation 3-1
Chapter 3
MODULE OPERATION
Setting the
Module Address
The Option-01T switch controller identifies each Adapt-a-Switch
plug-in or conventional 1260-Series module by a
module address
that is unique to that module. The module address is a number
from 1 through 12, inclusive.
The module address assigned to the 1260-134 depends on the
carrier slot into which the 1260-134 is inserted, and on the position
of the logical address DIP switch on the carrier side panel. The
switch has two settings:
·
1-6 (closed): When the switch is set to this position, the
module addresses of the plug-ins in the 1260-100 Carrier are
from 1 through 6. The module with address 1 is in the left slot
of the top row. The plug-ins are addressed in the following
pattern:
Figure 3-1, Front View – Module Addresses for 1 through 6
1
2
3
4
5
6