35601 User’s Manual
Racal Instruments
Ó
2003
Specifications A1
Appendix A
SPECIFICATIONS
Input Characteristics
Connector
BNC
Impedance
50
W
or 1M
W
, DC coupled
Damage Level
10Vp-p
Frequency Range
DC to 20MHz
Output Characteristics
General
Connector
BNC
Impedance
50
W
, 75
W
, or 600
W
, DC coupled
Protection
Short-circuit, 10 seconds
Gain
x10, fixed (can be ordered from factory with different gain setting)
Polarity
Output normal, or inverted
Amplitude
0 to 20Vp-p into matching impedance (50
W
, 75
W
, or 600
W
)
0 to 40Vp-p into high impedance
Square Wave Characteristics
Transition Time
<15ns
Aberrations
<5%
Sine Wave Characteristics
Small Signal
Bandwidth
50 MHz (-3dB) at 2Vp-p
Accuracy
±
(2% of full-scale amplitude range + 25mV), 1kHz square wave
Flatness (10Vp-p)
±
5% of amplitude to 1MHz;
±
10% of amplitude to 20MHz
THD
0.1%, 10Hz to 100KHz
Harmonics
<-50dBc, 100KHz to 5MHz
<-40dBc, 5MHz to 20MHz (10Vp-p)
General
Physical Size
Single-slot, 3U-high PXI module
Current Consumption
3.5 A maximum at +5V
Power Requirements
7.2W maximum
Signal Ground
Floated to the same level as the source, 250VDC maximum
EMC Certification
CE marked
Reliability
MTBF per MIL-HDBK-217E, 25
°
C, Ground Benign
Safety
Designed to meet IEC EN61010-1, UL 3111-1
Workmanship Std.
Conform to IPC-A-610D
Environmental
Operating Temperature 0
°
C to 50
°
C, RH 80% (non-condensing)
Storage Temperature
-30
°
C to 80
°
C
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com