35601 User’s Manual
Racal Instruments
Ó
2003
Installation 2-1
Chapter 2
INSTALLATION
Installation
Overview
This chapter contains information and instructions necessary for
initial inspection, grounding, repackaging for storage or
shipment, and installation.
Unpacking and
Initial
Inspection
Unpacking and handling requires normal precautions and
procedures applicable to handling of sensitive electronic
equipment. Contents of all shipping containers should be
checked for included accessories, and certified against the
packing slip to verify that the shipment is complete.
Safety
Precautions
The following safety precautions should be observed before
using this product and the associated computer. Although some
instruments and accessories are normally used with non-
hazardous voltages, there are situations where hazardous
conditions may be present.
This product is intended for use by qualified persons who
recognize shock hazards and are familiar with the safety
precautions required to avoid possible injury. The following
sections contain information and cautions that must be
observed to keep the 5601 operating correctly and safely.
CAUTION
For maximum safety, do not touch the product, test
cables, or any other instrument parts while power is
applied to the circuit under test. ALWAYS remove
power from the entire test system before
connecting cables or jumpers, or installing or
removing cards from the chassis. Do not touch any
object that could provide a current path to the
common side of the circuit under test or power line
(earth) ground. Always keep your hands dry while
handling the instrument.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com