User Manual 1260-50C/D
Installation Instructions 2-1
Chapter 2
INSTALLATION INSTRUCTIONS
Unpacking and
Inspection
1. Before unpacking the switching module, check the exterior of
the shipping carton for any signs of damage. All
irregularities should be noted on the shipping bill.
2. Remove the instrument from its carton, preserving the
factory packaging as much as possible.
3. Inspect the switching module for any defect or damage.
Immediately notify the carrier if any damage is apparent.
4. Have a qualified person check the instrument for safety
before use.
Reshipment
Instructions
1. Use the original packing when returning the switching
module to Racal Instruments for calibration or servicing.
The original shipping carton and the instrument
’
s plastic
foam will provide the necessary support for safe reshipment.
2. If the original packing is unavailable, wrap the switching
module in plastic sheeting and use plastic spray foam to
surround and protect the instrument.
3. Reship in either the original or a new shipping carton.
Option 01
Installation
Installation of the Option 01 to the 1260-50C/D is described in
the Installation section of the 1260 Series VXI Switching Cards
Manual.
Module
Installation
Installation of the 1260-50C/D Switching Module into a VXI
mainframe, including the setting of DIP switches, is described in
the Installation section of the 1260 Series VXI Switching Cards
Manual. The ID byte DIP switch, SW1-5 should be set OFF for
the 1260-50C module and ON for the 1260-50D module.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com