User Manual 1260-50C/D
Module Specific Syntax 3-2
CLOSE
The Module Specific Syntax for the CLOSE command is the
same as for the OPEN command.
PSETUP
The PSETUP command causes the specified module setup to be
transmitted to the VXI Controller. The syntax used is:
PSETUP <module address> [ ;<module address>] [;<module address>]
where <module address> is the address.
The responses to the PSETUP command for the 1260-50C/D
multiplexer is as follows:
1260-50C:
<module address>.1260-50C, 8 (1x4) 200 MHz MULTIPLEXER MODULE
<module address>.B BM
<module address>.END
1260-50D:
<module address>.1260-50D, 16 (1X4) 200 MHz MULTIPLEXER MODULE
<module address> .B BM
<module address> .END
PDATAOUT
The PDATAOUT command causes the specified module to
transmit the CLOSED state of the relays fitted to the switching
module to the 1260 Controller. The syntax used is:
PDATAOUT <module address>[ <module address>] [;<module address>]
The responses to the PDATAOUT command is as follows:
1260-50C:
<module address>. 1 260-50C 8 (1 x4) 200 MHz MULTIPLEXER MODULE
<module address> .<channel>[,<channel>] [,<channel>]
<module address> END
1260-50D:
<module address>.1260-50D 16 (1x4) 200 MHz MULTIPLEXER
MODULE
<module address>.<channel>[,<channel>] [,<channel>]
<module address>.END
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com