1260-22 User Manual Publication No. 980673-055 Rev. A
Installation Instructions 2-6 EADS North America Test and Services
Mating
Connectors
Mating connectors are provided for the 1260-22 module. EADS
North America Test and Services, also offers the following
accessories and spare connectors (see ordering information for
part numbers):
-30 Pin Connector Housing with backshell P/N 602345
-12 AWG Solder Contacts P/N 602346
The 30 Pin Connector consists of a connector housing and
backshell, The contacts are solder type and can except any gauge
wire up to 12 AWG. After wire attachment, the pin is inserted in the
housing and will snap into place, providing a positive retention. To
be sure the pin is locked in place, the assembler should tug on the
wire after insertion.
The suggested contact insertion tool for the pins is a Positronic
Industries P/N 9099. The corresponding contact extraction tool is
a Positronic Industries P/N 9081.
Refer to
Table 2-1
and
Table 2-2
for the mapping of channels to
connector.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com