User Manual 1260-17
Module Specific Syntax 3-1
Chapter 3
MODULE SPECIFIC SYNTAX
1260-17 Module
Specific Syntax
The Module Specific Syntax for the 1260-17 is required in the use
of the OPEN and CLOSE commands. It will also appear in data
output by the Master in response to the PDATAOUT and PSETUP
commands
.
Syntax
The Module Specific Syntax for the 1260-17 Signal
Multiplexer/Scanner module is as follows:
<module address>.<channel number>
where <module address> is the address.
<channel number> is the reference number of the channel to be
closed, value 0 - 79.
NOTE
The <module address> used here is NOT the VXIbus
defined logical address of the 1260 Series Master. It is
peculiar to the 1260 Series and describes the
switching module in relation to the Master. This
address corresponds to the binary value of the switch
setting of SW1 on the switching module PCB.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com