1260-132 User Manual
Installation Instructions 2-3
Module
Configurations
The 1260-132 is a 1 x 23, two wire,high voltage reed switch
multiplexer module The 1260-132 uses an isolation relay to
disconnect the 1x23 multiplexer when cascading multiple 1260-132
modules to build larger multiplexers . This additional relay reduces
the capacitance and increases the insulation resistance for large
multiplexer configurations
Front Panel
Connectors
The 1260-132 has a 48-pin front-panel connector, labeled J200. It is
a 48-pin, DIN style. See
Figure 2-1
for pin numbering.
Table 2-1
shows the mapping of channel numbers to connector pins.
Information about available mating connectors is provided
immediately after
Table 2-1
. See
Figure 2-2
for a detail of the
actual relay diagram. See
Figure 2-3
for a block diagram of the
1260-132.
Figure 2-1, Front-Panel Connector Pin Numbering
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
A
C
E
Summary of Contents for 1260-132
