5
Attention:
Do not mix up the “+” and “-“ connections on the loudspeakers and the headunit / amplifier
as this will cause a bass cancellation with very low bass reproduction!
Place a bead of RTV sealant or equivalent around the back rim of the loudspeaker basket and place
it into the installation location.
•
Carefully attach the loudspeaker with the enclosed self-tapping screws 4 x 25. Align loudspeaker,
ensuring it lies flat and then tighten screws. Make sure that the woofer lies completely flat and may
not be turned by the screws (Figure 3)