-2-
Safety Instruction
Components
Component List
Technical specification
1. Detergent container
2. Threaded connector for high-pressure hose
3. On / Off switch
4. Water supply inlet pre-fitted with quick fit
connector
(male)
5. Water supply hose with pre-fitted tap and
quick
fit
connector(female)
6. Trigger gun
Rated voltage:
Rated Power:
Rated Frequency:
Protection Class:
Degree of protection:
Permissible pressure:
Rated Pressure:
Inlet pressure:
Supply water temperature:
Nozzle spray angle:
Max output flow rate:
230-240V AC
1800W
50HZ
II
IPX5
140bar
90bar
1.5-6bar
0-40
o
C
0-90 degree
6.0L/min
7. High pressure hose
8. Rotary brush
9. Fixed washing brush
10. Turbo Lance
11. Adjustable Lance
12. 5-meters Mains cable
13. 3 screws for fixing detergent container
14. Needle
General Safety Rules
WARNING: Read the instructions fully before using the product for the first time. Failure
to follow the instructions may result in fire, electric shock and or serious injury.
We recommend the user wear safety equipment during use.
We recommend the product be used with a RCD (Residual Current Device).
Please Retain These Instructions For Future Use And Referral
• This unit must not be used by children or untrained personnel.
• When operating the unit in high-pressure mode, the lance may cause kickback. Therefore
please ensure that you hold the spray gun firmly. When using the unit we recommend that
other people are at least 10m away from the working area.
• High-pressure jets can be dangerous if misused. The jet MUST NOT be directed at yourself,
other people, animals, live electrical equipment or the pressure washer itself. The trigger gun
safety lock prevents the trigger from accidentally being engaged. This safety feature does not
lock trigger in the on position.
• Do not use the pressure washer if the supply cord or other important parts are damaged (e.g.:
high pressure lance or hoses). Never carry your pressure washer by the cord.
• Do not disconnect the high-pressure hose whilst the system is under pressure. This system is
capable of producing 1300PSI. To avoid rupture and injury, do not operate this pump with
components rated less than 1300PSI working pressure (including but not limited to spray guns,
hose and hose connections.)
• Do not use acids or flammable liquids in the machine.
• When using a pressure washer always ensure that your water connection is protected by a
backflow preventer (as per water byelaws). This will avoid possible contamination of your water
supply. Use cold water feed only.
• Protect the unit against freezing, avoid storing the
machine where it may be susceptible to frost.
• Prior to starting the pressure washer in cold weather, be sure ice has not formed in any part of
the equipment.
• The unit must continuously run with water. Dry running will cause serious damage to the seals.
IMPORTANT:
The pressure washer is equipped with an auto stop device. When the trigger is in
the off position it will open the power circuit to the motor and cause the pressure washer motor to
stop. Motor will resume again when trigger is pulled. The pressure washer is also equipped with a
main power ON/OFF switch located on the unit. It should always be moved to OFF position when
the pressure washer is not being used.
This product is a class II product-double insulated. No means of grounding (to earth) is provided
on this product nor should it be added. A qualified person should only carry out servicing.
If an extension lead is to be used with this product, please ensure:
Use only extension cords having an electrical rating not less than the rating of the product.
Use only extension cords that are intended for outdoor use.
To reduce the risk of electrocution, keep all connections dry and off the ground.
Do not touch plug with wet hands.
Hose: Water supply hose must be at least 1/ 2" in diameter with a minimum recommended
length of 5 meters.
1
2
4
5
3
6
8
7
9
10
11
12
14
-3-
13
