10
We reserve the right to make technical changes.
3. Lowering the implement
The implement can be parked in either its retracted
(10.1) or extended position.
We recommend putting the implement in its folded-
out position (10.2) and lowering it completely
before storing it for the winter.
Parking in retracted position (10.2):
Lower the running gear as far as possible.
You should also prop up the implement frame on
both sides to prevent accidental lowering.
Chock the machine to prevent it rolling away.
3.1 Uncoupling the brakes
Uncouple the red brake line and hang it in its
holder (9.2/1);
Uncouple the yellow brake line and hang it in its
holder (9.2/2);
The spring-loaded brakes act on the running gear.
When the pressure vessel is full, pressing the red
button on the brake valve (10.4/1) releases the
brake once (even if the brake line is disconnected).
3.2 Hydraulic connections
Uncouple all hydraulic connections from the tractor.
Protect the hydraulic plug from dirt with the sealing
caps and place in the holder provided for this pur-
pose.
3.3 Electrical connections
Disconnect all cables from the tractor. Store the
removable electronic control box and its cables in
a dry place.
Carefully cover the plug sockets on the implement
and tractor.
4. Changing to working position (10.5)
Extend the folding tools and sowing rails with twin-
action control device.
Fully extend the cylinder. Horizontal position of the
tools.
Switch on the electronic operating system.
10.2
10.3
10.1
1
10.5
10.4
