Rabe Albatros Vari-HydroAvant, Operating Instructions Manual

Page: 31 / 36

31 05.2013
Albatros / Super-Albatros
Subject to technical modifications
The swivel axis of the combi wheel (29/1) may be
readjusted – crown nut – control of the swivelling
speed during „turning“.
Oil joints and keep spindles running. Check
hydraulic hoses regularly and replace if damaged
or embrittled (spare parts list). Hoses are subject to
natural aging, the time of usage should not exceed
5-6 years.
When water jet cleaning (especially with high
pressure) do not aim directly on bearings.
Preserve all slide faces at the shut-down
implement with an anticorrosion agent and all
piston rods with acid-free grease.
Repair defects in the paintwork.
Replace wear parts in time; Replace shares and
landsides before the frog (share support/side plate)
starts to wear.
First turn the point of shares with reversible points
and then put it in front.
Pre-tighten new mouldboards at the turnbuckle
with2 turns (replace defective shims – see spare
parts list).
Use only original RABE parts and original bolts!
Tyre air pressure: Depth wheel – 2,5 bar
Combi wheel – 3,75 bar
29
1