21
05.2013
Albatros / Super-Albatros
Subject to technical modifications
Traction point and first furrow working
width
Make any possible corrections of the traction point
or adjustments of the first furrow working width ca.
medium working width setting (see “Presetting”).
If both settings need to be corrected: then first
traction point and then width adjustment.
Future adjustments of the working width of the
first body resulting for example from other working
depths or hillside locations have only minor effects
on the traction point setting.
Traction point (lower link position): The tractor is to
run in the furrow without side pull.
If the laterally flexible lower links do not end up at
ca. the centre of the tractor and therefore, there
is side pull, this is to be corrected with a threaded
rod or cylinder
(6/1)
(twist the limit stop
12/2
at the
cylinder – wrench
12/3
– secure with key
12/4
in
the groove).
Threaded rod/cylinder
(6/1)
shorter – Three-point
linkage moves to the ploughed soil
Threaded rod/cylinder
(6/1)
longer– Three-point
linkage moves to the unploughed soil
If for example the tractor is pulled to the ploughed
soil at the front, then shorten the threaded rod or
cylinder.
Always move the cylinder to the limit stop.
First furrow working width: is to be adjusted
according to the working width of the other bodies.
Move the plough frame parallely with the spindle
(6/2)
or with the hydraulic system:
Move the plough frame towards the ploughed
soil– first furrow narrower
Move the plough frame towards the unploughed
soil– first furrow wider.
In case of hydraulic first furrow width adjustment:
do not shift under load - not lifted and not while
„towing“.
12
3
2
4
6
1
2
3
Summary of Contents for Albatros Vari-HydroAvant
Page 2: ......
Page 4: ...4 05 2013 Albatros Super Albatros Subject to technical modifications...
Page 35: ......
