Rabbit Smartcat, User Manual

Page: 125 / 135

User’s Manual 119
A
PPENDIX
E. D
EMONSTRATION
B
OARD
Appendix E shows how to connect the Demonstration Board to
the BL2100.
E.1 Connecting Demonstration Board
Before running sample programs based on the Demonstration Board, you will have to con-
nect the Demonstration Board from the BL2100 Tool Kit to the BL2100 board. Proceed as
follows.
1. Use the wires included in the BL2100 Tool Kit to connect header J1 on the Demonstra-
tion Board to screw-terminal headers J5 and J8 on the BL2100. The connections are
shown in Figure E-1 for sample program
DIGIN.C
and for sample program
SMTP.C
, in
Figure E-2 for sample program
DIGOUT.C
, and in Figure E-3 for sample program
SSI.C
.
2. Make sure that your BL2100 is connected to your PC and that the power supply is con-
nected to the BL2100 and plugged in as described in Chapter 2, “Getting Started.”