Rabbit eDisplay, User Manual

Page: 20 / 172

14 eDisplay (OP7200)
2.6 PONG.C
You are now ready to test your set-up by running a sample program.
Find the file
PONG.C
, which is in the Dynamic C
SAMPLES
folder. To run the program,
open it with the File menu (if it is not still open), then compile and run it by pressing F9 or
by selecting
Run
in the
Run
menu. The
STDIO
window will open on the PC and will dis-
play a small square bouncing around in a box.
This program shows that the CPU is working. The sample program described in
Section 5.2.3, “Run the PINGME.C Demo,” tests the TCP/IP portion of the board.
2.7 Where Do I Go From Here?
NOTE: If you purchased your OP7200 through a distributor or Rabbit partner, contact
the distributor or partner first for technical support.
If there are any problems at this point:
•
Use the Dynamic C Help menu to get further assistance with Dynamic C.
•
Check the Rabbit Technical Bulletin Board and forums at www.rabbit.com/support/bb/
and at www.rabbit.com/forums/ .
•
Use the Technical Support e-mail form at www.rabbit.com/support/ .
If the sample program ran fine, you are now ready to go on to explore other OP7200 fea-
tures and develop your own applications.
The following sample programs illustrate the features and operation of the OP7200.
These sample programs can be used as templates for applications you may wish to
develop.
Chapter 3, “Subsystems,” provides a description of the OP7200’s features, Chapter 4,
“Software,” describes the Dynamic C software libraries and introduces some sample pro-
grams. Chapter 5, “Using the TCP/IP Features,” explains the TCP/IP features.
Basic Keypad Touchscreen
BUFFLOCK.C
CONTRAST.C
PRIMITIVES.C
SCROLLING.C
TEXT.C
KP_16KEY.LIB
KP_ANALOG.C
KP_BASIC.C
KP_MENU.C
BTN_16KEY.C
BTN_BASICS.C
BTN_KEYBOARD.C
CAL_TOUCHSCREEN.C
RD_TOUCHSCREEN.C