BL4S200 User’s Manual
99
setPPM_H (continued)
bind_duty
use
BL_BIND_LEAD
or
BL_BIND_TRAIL
to enable binding for the
trailing edge of the PPM signal to another PWM or PPM output on
a channel hosted by same RIO chip and block
RETURN VALUE
0 — success.
-EINVAL
— invalid parameter value.
-EPERM
— pin type does not permit this function.
-EACCES
— resource needed by this function is not available.
-EFAULT
— internal data fault detected.
positive number — Mode Conflict — the positive number is a bitmap that corresponds
to the pins on a particular block of a RIO chip that have not been configured to support
this function call. Appendix D provides the details of the pin and block associations to
allow you to identify the channels that need to be reconfigured to support this function
call.
SEE ALSO
brdInit, setFreq_H, setOffset_H, setDuty_H, setToggle_H, setSync_H
electronic components distributor
