BL4S200 User’s Manual
8
1.3 Development and Evaluation Tools
1.3.1 Tool Kit
A Tool Kit contains the hardware essentials you will need to use your own BL4S200 single-
board computer. These items are supplied in the Tool Kit.
•
Getting Started
instructions.
•
Dynamic C
CD-ROM, with complete product documentation on disk.
•
USB programming cable, used to connect your PC USB port to the BL4S200.
•
Universal AC adapter, 12 V DC, 1 A (includes Canada/Japan/U.S., Australia/N.Z.,
U.K., and European style plugs).
•
Stand-offs to serve as legs for the BL4S200 board during development.
•
Demonstration Board with pushbutton switches and LEDs. The Demonstration Board
can be hooked up to the BL4S200 to demonstrate the I/O and capabilities of the
BL4S200.
•
CAT 5/6 Ethernet crossover cable.
•
Cable assemblies with Micro-Fit
®
connectors.
•
Rabbit 4000 Processor Easy Reference
and
Rabbit 5000 Processor Easy Reference
posters.
•
Screwdriver.
•
Registration card.
Figure 1. BL4S200 Tool Kit
Rabbit, Dynamic C, and Digi are registered trademarks of Digi International Inc.
SD is a trademark of the SD Card Association.
BL4S200
The BL4S200 is a fully loaded series of single-board computers that feature built-in Ethernet, Wi-Fi, or
ZigBee network connectivity, configurable I/O, high-current outputs, RS-232 and RS-485 serial I/O, and
an A/D converter. These Getting Started instructions included with the Tool Kit will help you get your
BL4S200 up and running so that you can run the sample programs to explore its capabilities and develop
your own applications.
Tool Kit Contents
t
Getting Started
instructions.
t
Dynamic C
CD-ROM, with complete product documentation on disk.
t
USB programming cable, used to connect your PC USB port to the BL4S200.
t
Universal AC adapter, 12 V DC, 1 A (includes Canada/Japan/U.S., Australia/N.Z., U.K., and
European style plugs).
t
Digi® XBee USB (used as ZigBee coordinator for BL4S230 model).
t
Stand-offs to serve as legs for the BL4S200 board during development.
t
Demonstration Board with pushbutton switches and LEDs. The Demonstration Board can be
hooked up to the BL4S200 to demonstrate the I/O
and capabilities of the BL4S200.
t
Cable assemblies with Micro-Fit
®
connectors.
t
Screwdriver.
t
Rabbit 4000 Processor Easy Reference
and
Rabbit
5000 Processor Easy Reference
posters.
t
Registration card.
Installing Dynamic C
®
Insert the CD from the Development Kit in
your PC’s CD-ROM drive. If the installation
does not auto-start, run the
set up.exe
pro-
gram in the root directory of the Dynamic C
CD. Install any Dynamic C modules after you
install Dynamic C
.
electronic components distributor
