Rabbit Air MinusA2 SPA-780J, Manual

Page: 26 / 28

Do not attempt to install this product if you do not understand the
instructions. Contact a qualified contractor to install the mounting bracket and
call 0120-152-952 if you have any questions. You risk the possibility of
damaging the Air Purifier, damaging other property and personal injury if the
mounting bracket is not installed properly. Check to make sure there are no
missing or defective parts. Do not attempt to install the mounting bracket if
there are missing or defective parts. Contact Rabbit Air and replacement parts
will be shipped to you immediately. Rabbit Air is not liable for damage or injury
caused by incorrect mounting, incorrect assembly or incorrect usage.
• After installing the wall-mount bracket, make sure it is firmly in place before
putting the MinusA2 Air Purifier on it.
• Take care not to drill or screw into existing wiring in the wall while installing
the wall-mount bracket.
Correct installation is extremely essential, and falls outside the scope of
responsibility of Rabbit Air. Please consult a qualified contractor and/or
specialist supplier to install the mounting bracket. Maximum weight of air
purifier SPA-780J: 9.1 kg/20lbs.
Wall-Mounting your MinusA2
Disclaimer for installing wall-mounted objects
Only use the approved Rabbit Air wall-mount kit to install the MinusA2 Air
Purifier on your wall. The MinusA2 Air Purifier is designed to be either free
standing or wall-mounted.
Don’t have a wall-mount kit? Want one? Order online at
www.rabbitair.co.jp or over the phone at 0120-152-952.
21 22
(Optional)
Wall-mount installation guidelines:
• Make sure the MinusA2 Air Purifier has at least 60 cm of clearance from the
ceiling and 20 cm of clearance on either side.
• Be careful not to drop the front panel or filter case when replacing the filters.
• Do not pull on the power cord.
• Make sure the hanger screws have been securely driven into studs.
60 cm
20 cm 20 cm